The TrafFix Devices "Big Sandy" is an Impact Attenuator Sand Barrel that is manufactured from UV stabilized high density polyethylene. The Big Sandy sand barrel has been tested and certified to meet the crash worthy requirements of NCHRP 350.
The Compressor Attenuator is a re-directive, non-gating, bi-directional, and self-recovering attenuator that has been specifically designed to take repeated impacts without the need for additional recovery procedures, labor, or repairs.
The Scorpion TL-3 Trailer Attenuator attaches to a truck and requires little to no modification of the host vehicle. The Scorpion TA has been NCHRP-350 tested and accepted for all mandatory and optional offset and angled impacts on unrestrained host vehicles.
The Scorpion Truck Mounted Attenuator is hydraulically powered and is ideal for stationary and mobile construction zones. The Scorpion TMA has been tested and PASSED ALL optional and mandatory requirements suggested in the NCHRP-350 TL-3.
The Sentry Longitudinal Energy Dissipater (SLED) is a narrow, non-redirective gating crash cushion that is designed to shield permanent and temporary barriers including concrete, steel, and plastic. The four internal steel cables of the SLED envelop the impacting vehicle, reducing potential secondary accidents.
The SLED Euro-Terminal is the only free standing attenuation device that has been tested and accepted to the EN1317-4 P4 requirements. Since the SLED Euro-Terminal system is free standing, there are no pavement anchors, bolts or drilling to compromise the integrity of the roadway surface or bridge deck.
The SLED Mini is a MASH Tested and Passed as a Uni- and Bi-Directional applications and as a TL-1 End Treatment for the TrafFix Water-Wall™. With its stout design, the SLED Mini virtually eliminates vaulting of the impacting vehicle.
TrafFix A-Frame is made of rigid impact resistant polyethylene and its' legs are sand fillable for ballasting, stackable for storage and transportation. Each A-Frame leg can be used with the TrafFix I-Beam Rails, Phoenix Plastic Rails, or lumber.
TrafFix Devices plastic folding barricades are made from durable polyethylene. The lightweight and easy to handle Blow Molded plastic legs provide increased strength to minimize damage and prevent sagging.
TrafFix Devices Type III Barricades meet all of your Traffic safety needs. Type III Barricades are larger and and offer better stability and visibility compared to type I & II barricades and are available in a variety of lengths.
The TrafFix Vertical Panel Barricades are made from durable blow molded polyethylene panels and recycled rubber bases. Both panels and bases can be stacked separately for easy transportation and storage.
The TrafFix ADA Wall is used to create hand guided safe passages through workzones that meet ADA requirements. The ADA Wall is MASH Tested, Passed, and Eligible as TL-3 Longitudinal Channelizing Device.
The TrafFix Urbanite creates a continuous hand guided safe passage through workzones. The Urbanite is made of UV stabilized, high density polyethylene.
The Sentry Water Cable Barrier is an NCHRP 350 TL-3 certified work zone crash barrier that can be used as an alternative to cumbersom concrete barriers in a construction work zone.
The TrafFix Water-Cable Barrier is designed with three molded in galvanized steel cables and has been MASH Tested, Passed and Eligible at TL-1 31 mph (50 km/hr) and TL-2 43.5 mph (70 km/hr) levels.
The Water-Wall Barrier is a durable side protective temporary crash barrier system that can be used in many situations; from protecting the public surrounding a construction site, to work-zone safety on roads and highways.
The Water-Wall Fence easily retrofits to the TrafFix Water-Wall to create an imposing and secure barrier for unwanted entries. Made from 11 gauge galvanized steel mesh, the Water-Wall Fences provies excellent security and visibility.
The Enviro-Cone is MUTCD Compliant, 80% recycled by weight, made from low density polyethylene, recyclable when damaged or destroyed, and provides superior all-weather performance and increased life span compared to PVC Cones.
The Retractable Cone Bar improves safety in your work zone by creating a visual and physical pedestrian barrier. The retractable bar is made of durable ABS plastic and wrapped in reflective sheeting for increased night-time visibility.
The TrafFix PVC Cone is Injection Molded, MUTCD Compliant, and comes in 18" and 28" heights. TrafFix PVC Cones are fluorescent orange in color and has excellent stability and anti-skid performance.
The TrafFix Spring Cone & Tote System, with its compact design for easy storage, is an ideal solution for temporary traffic control. Spring Cones meet MUTCD requirements for 28" reflective highway traffic cones.
The TrafFix Cone is 42" tall and is ideal for mounting signs and barricade lights for temporary traffic control. Ideal for school crossing guards, cross-walk striping, hotel/motel check-in areas and parking structures.
Grabber-Cone's patented handle design allows for easy movement and prevents cones from sticking while stacked. The Grabber-Cone meets or exceeds Federal MUTCD standards.
The stem of the Grabber-Tubes are made of flexible yet durable fluorescent low density polyethylene material, with UV inhibitors to minimize fading.
The Grabber-Tube 2 patented 'Grabber Hole' in the tube stem provides a convenient carrying handle for movement and deployment, even off the bed of a work truck.
TrafFix Devices Looper-Cone is designed with a convenient handle that allows for easy movement and placement. The Looper-Cone meets Federal MUTCD standards.
The Looper-Tube made of flexible low density polyethylene and the patented Looper handle allows for easy movement. The Looper-Tube meets Federal MUTCD standards.
The Roof Edge Delineator Cone system from TrafFix Devices is designed to provide a quick and easy OSHA compliant Roof Warning Line System. The cones are made of Low Density Polyethylene plastic and can be stacked for easy transportation and storage.
The TrafFix Channelizer Drums are available in rugged, durable high density polyethylene, or impact resistant, reshapeable low density polyethylene. With its tapered design, the Channelizer Drums can be stacked with or without barricade lights for easy handling and storage.
TrafFix Devices offers the largest selection of channelizer drum bases in the industry. Choose from an array of different types and styles that best fit your needs and budget.
TrafFix Devices Roll-Up Signs are available in non-reflective mesh/vinyl and reflective vinyl - Reflective Material: Reflexite, Marathon, or 3M Diamond Grade.
Sign Stand Accessories: Three Flag Bracket, Truck Mounting Bracket, Rigid Sign Adapter, Storage Systems, Carrying Bags, and Safe Sleeve-350
Safe-Sign 350 is the best alternative to heavy plywood and aluminum signs. The Safe-Sign 350 is made of corrugated plastic that is lightweight yet rigid.
The Zephyr portable sign stand is constructed of a steel plate molded into a recycled rubber base (weight 38 lbs).
TrafFix Sign Stand is designed with unique Step-N-Drop Legs, this highly advanced feature enables you to quickly set-up the stand.
All four legs of the Quad-Drop sign stand drop at once providing the quickest deployment of any traffic control sign stand.
The Phoenix Sign Stand is designed with a pre-drilled square upright to accommodate multiple hole patterns found in most size signs so mounting signs of different shapes and sizes is a simple and easy process with zero fuss.
The TrafFix Devices Tri-Buster Tripod Sign Stand is the ideal combination of durability, economy, safety, and versatility.
All steel construction with powder coated paint. The telescoping mast is for rigid or roll-up sign brackets and allows for variable sign heights.
Econo Buster is a lightweight (30 lbs.) yet durable stand for 36" x 36" and 48" x 48" roll-up or rigid signs.
Lightweight and easy to carry, the Aluminum Buster Sign Stand weighs only 28 pounds, and its all Aluminum construction resists corrosion and rusting.
The Big Buster Sign Stand has a steel base and two springs, it can withstand heavy winds, severe wind gusts, and air currents created by passing trucks.
The Super Buster Sign Stand has a powder coated steel base, two heavy duty springs, and is designed to withstand high winds and severe gusts from passing traffic.
Durable powder coated steel clamp with heavy duty T-pins and hardened steel points. Ideal for highway conditions where shoulder space is limited.
TrafFix Stop/Slow Paddles are made from strong, non-corrosive material. Available in reflective and non-reflective surfaces/
TrafFix Devices ANSI/ISEA Class II Safety Vests come in a variety of styles and colors to meet your safety needs. Whether you need a high visibility, reflective safety vest or a highly reflective supervisors vest with pockets, TrafFix Devices has the vest to suit your needs.
TrafFix Devices ANSI/ISEA Class III Safety Vests come in a variety of styles and colors to meet your safety needs. Whether you need a high visibility, reflective safety vest or a highly reflective supervisors vest with pockets, TrafFix Devices has the vest to suit your needs.
TrafFix Devices ANSI/ISEA Class E Safety Pants come in a variety of styles and colors to meet your safety needs. Each Class E Pant feature extremely bright coloring throughout the pant, reflective stripes at the bottom of each leg, and 2 pocket openings for easy access to pants pockets.
Non ANSI/ISEA Compliant standard safety vests, from TrafFix Devices, come in a variety of styles and colors to meet your safety needs. All poncho style vests are manufactured from a lightweight mesh material with Velcro closures, no pockets, and come in Regular and Extra Large+ sizes.
The TrafFix LED Batons are water and shock resistant and come in Red, Green, and Blue.
TrafFix Devices Lighting Products: Model 400, Y2K Barricade Light, Econo-Light, Strobe Light Model 7800, Model 630, Model 212, Model 2006 Lights.
TrafFix can apply these rolls of pre-striped barricade sheeting to a specially extruded roll of flexible yet durable plastic.
Alerting Drivers with Sight, Sound and Sensation Awareness. The TrafFix Alert Rumble strip is made of recycled rubber for maximum durability and adherence.
Weed Mat is made from 100% recycled tires. One 48" x 43" Weed Mat removes 10 - 12 tires from the land fill.
Improve Worker Safety with the TrafFix Devices Work Mate. Helps reduce leg and back strain allowing greater productivity and alertness.